Sealcoat-Asphalt Based. Driveway Sealer. Parking Lot Sealer. MasterSeal. SealMaster.

ColorPave HD 500

Ideal for Coating Imprinted Asphalt Surfaces

ColorPave HD 500 provides Color to asphalt surfaces including: Driveways, Parking Lots, Jogging/Bike Paths, Walkways, and more. ColorPave HD 500 has color choices that can contribute to LEED credits and green parking. ColorPave HD 500 is particularly well-suited for application over imprinted or stamped asphalt. Many color choices are available by using ColorPlus Pigment Dispersion.

Features

  • Unique cross-linking technology provides high durability
  • Fortified with sand for slip-resistance and durability
  • Fast drying formula
  • Designed for spray application (Due to Colorpave HD’s unique fast drying technology, squeegee application is not recommended)

Bring Color to Your Pavement!

Sizes Available

5 Gallon Pail (4 Gallon Net)

ColorPlus Pigment Dispersion Colors

* Colors may vary slightly from actual product.

Download

SDS (PDF)
Spec Sheet (PDF) – English | Spanish
Catalog

Description

ColorPave HD 500 is formulated with special cross-linking 100% acrylic polymers and is a water based emulsion pavement color coating. It is designed to be mixed with ColorPlus pigment dispersion to achieve desired color.

Uses

ColorPave HD 500 can be used on Asphalt, Stamped Asphalt, and existing acrylic surfaces. Decorative asphalt areas that were previously color coated with an acrylic-based coating can be resurfaced with ColorPave HD 500. Do not use ColorPave HD 500 on previously sealcoated areas where Coal Tar and non-acrylic formulas were used.

ColorPave HD 500 is mixed with ColorPlus Pigment Dispersion. ColorPave HD 500 contains sand for added traction and durability.

Coverage

One gallon of will cover approximately 60 to 70 square feet (6.7 to 7.8 square yards) per coats. Two coats are recommended for optimum performance.

ColorPave HD is formulated for job-mixing with ColorPlus, water and sand.

Surface Preparation

Surface must be clean from all oils, grease, loose material, dirt, and dust. Pavement surface repairs should be made with a suitable hot or cold asphalt mix. Cracks should be filled with SealMaster or SportMaster acrylic base crack filling products. DO NOT USE HOT APPLIED CRACK FILLING MATERIALS.

Mixing Procedures

Add 1 pint of ColorPlus Tint to one 5-gallon pail (4-gallon net) of ColorPave HD 500.

Application

ColorPave shall be applied by specialized textured spray equipment.

Important

Temperatures must be above 50°F both during application and for a period of at least 24 hours after application. Do not apply when rain is imminent or forecast.

Clean Up

Wash tools in water before material dries.

Unit Size Unit Weight
5 Gallon Pail (4 Gallon Net) 56 lbs.