Concrete Crack Sealant
100% Acrylic Emulsion Crack Sealant
- Designed for filling cracks in concrete surfaces
- Environmentally friendly 100% acrylic, water-based emulsion
- Outstanding flexibility – remains flexible at temperatures below 0°F
- High solids formula for less shrinkage
Sizes Available
1 Gallon Jug
Coverage
Typically, one gallon of Concrete Crack Sealant will fill approximately 75-150 feet of cracks.
Description
A 100% acrylic elastomeric crack sealant designed for sealing cracks and joints in concrete.
Surface Preparation
Cleaning Cracks: Remove dirt and vegetation from cracks with screwdriver or other suitable instrument. Flush out crack with water and allow to dry.
Damaged and Spalled Areas: Remove dirt and debris from repair area. Scrub thoroughly with wire brush and rinse with water.
Mixing Procedures
Use as is. DO NOT DILUTE.
Application
Allow material to dry and cure for 48 hours prior to resuming foot or vehicle traffic.
Important
Temperatures must be above 50°F both during application and for a period of at least 24 hours after application. Do not apply when rain is imminent or forecast. Keep liquid from freezing. Close container when not in use.
Clean Up
Wash tools with water before material dries.
| Unit Size | Unit Weight |
| 1 Gallon Jug | 15 lbs. |