SealMaster MasterSeal

Asphalt and Blacktop Sealcoating

MasterSeal pavement sealcoating replenishes the binder that is lost through weathering and aging, and provides superior protection against environmental distress.

Features

  • User Friendly – No Irritating Fumes
  • Deep, Rich Black Color
  • More Flexible – Won’t Check Crack
  • Ideal for all Asphalt Pavement Surfaces

Formulated to Protect & Beautify Asphalt Pavement

Sizes Available

5 Gallon Pail, 55 gallon Drum, Bulk

Colors Available

Black

* Colors may vary slightly from actual product.

Coverage

One gallon of MasterSeal Concentrate will cover approximately 100-120 square feet (11.1 to 13.3 square yards) per coat when properly mixed and applied.

NOTE: Coverage rate may vary due to pavement age, porosity, and method or application.

Download

SDS (PDF)
Spec Sheet (PDF) – English | Spanish
Video
Catalog

Description

MasterSeal is a mineral filled asphalt emulsion sealcoat designed to protect and beautify all asphalt pavement including parking lots, driveways, airports, shopping malls, roadways, and more.

Surface Preparation

New asphalt surfaces must cure a minimum of four weeks under ideal weather conditions before sealcoating is applied. Surface must be clean and free from all loose material, dirt, and dust. Cracks should be filled with SealMaster Hot Pour or Cold Applied crack fillers. Treat all grease, oil, and gasoline stains with SealMaster Petro Seal or Prep Seal.

Mixing Procedures

For optimum results, mix MasterSeal in accordance with the following mix design (based on 100 gallons for ease of calculation):

MasterSeal: 100 gallons
Water: 15-25 gallons
TopTuff Polymer Additive: 2 gallons
Sand: 300 – 500 lbs.
Mix materials to a uniform consistency.

NOTE: Zetac additive may also be used with MasterSeal.

Application

For optimum performance two coats of mixed material are recommended. Apply by squeegee, brush, or spray. Allow a minimum of 2 to 4 hours drying time before applying second coat. Allow 24 hours before parking cars or allowing traffic to resume.

Important

Temperatures must be above 50°F both during application and for a period of at least 24 hours after application. Do not apply when rain is imminent or forecast.

Clean Up

Wash tools in water before material dries.

Unit Size Unit Weight
5 Gallon Pail 55 lbs.
55 Gallon Drum 580 lbs.
Learn More About

MasterSeal Ultra

Factory Blended with water, polymer additive and sand