Top Tuff Sealer Additive
Improve Pavement Sealer Performance with Top Tuff
Top Tuff is a water-based latex emulsion additive designed to enhance the toughness and durability of pavement sealers. It improves the suspension of sand, ensures better sand anchoring for extended wear and helps reduce power steering marks.
Additionally, Top Tuff increases resistance to oils, fuels and grease while creating a darker, richer black finish. These benefits make Top Tuff an excellent choice for contractors seeking to improve both the performance and appearance of their pavement sealing applications.
Features & Benefits
Improved Surface Toughness
Top Tuff strengthens pavement sealer film to improve toughness and durability for extended wear.
Enhanced Sand Suspension & Retention
Top Tuff improves sand suspension in the sealer mixture and anchors sand in the finished coating.
Reduced Power Steering Marks
Top Tuff reduces power steering marks to maintain a cleaner, more uniform pavement appearance.
Improved Oil, Fuel & Grease Resistance
Top Tuff enhances the pavement sealer film’s resistance to oils, fuels and grease, improving performance in areas exposed to contaminants.
Darker, Richer Black Finish
Top Tuff produces a darker black finish that enhances the appearance of freshly sealed pavement.
Water-Based Latex Emulsion
Top Tuff features an environmentally friendly, water-based latex emulsion formula designed to improve the performance of SealMaster pavement sealers.
Application Guidelines
SealMaster
Top Tuff
Film Toughener for Pavement Sealers
Surface Preparation
Mixing Procedures
Add a minimum of 1-2 gallons of Top Tuff per 100 gallons of pavement sealer concentrate. Dilute Top Tuff 1:1 with water before adding it to the sealer mixture.
With the tank agitator running, add water to the sealer concentrate, followed by the diluted Top Tuff. Slowly add sand as the mixture thickens. Maintain agitation throughout application for a uniform consistency.
Application
Apply pavement sealer fortified with Top Tuff using pressurized spray or squeegee equipment. Apply two coats for optimum performance, with an optional third coat in high-traffic areas.
Refer to the Technical Data Sheet (TDS) for complete mixing and application instructions.
Important:
Temperatures must be above 50°F during application and remain so for at least 24 hours afterward. Do not apply when rain is imminent or forecast.
Available Sizes:
5-Gallon Pail – 48 lbs. | 55-Gallon Drum – 535 lbs.
Before Sealcoating:
- Fill pavement cracks with SealMaster hot-pour or cold-applied crack filler
- Treat grease, oil and gasoline stains with SealMaster PetroSeal or PrepSeal
- Remove dirt, dust, and loose material from the pavement surface
Get More from Every Gallon of Pavement Sealer
The right additive can make all the difference in your next sealcoating project. Whether you need faster drying times, improved durability, better sand suspension or a darker, richer finish, SealMaster has the solution. With over 160 locations nationwide, our team can help you choose the right additive for your sealer mix and application needs. Contact your local SealMaster today to find out which additive is right for your next project.