Fast Dry Traffic Paint
High solids 100% acrylic traffic paint.
Dries in less than 5 minutes.
Available in white and yellow.
Meets TTP-1952D and TTP-1952E.
5 Gallon Pail, 55 gallon Drum
15 Mils wet film thickness
(4″ wide stripe – 325 linear feet/gallon; 2″ wide stripe – 650 linear feet/gallon).
* Colors may vary slightly from actual product.
SealMaster® Fast Dry Traffic Paint is a rapid drying acrylic water base paint formulated for striping exterior and interior asphalt and concrete surfaces.
Surface must be clean and dry prior to application. New asphalt should cure sufficiently to be free of light oils on the surface. Allow freshly sealed pavement surfaces to cure for at least 24 hours under ideal weather conditions (70°F, low humidity). Concrete surfaces should be acid etched and flushed with water prior to application.
Stir thoroughly before using. Use as is. Thinning with water should not be required.
Apply with spray equipment, brush, or roller to properly cleaned and prepared surface.
Apply to clean dry surface when surface and air temperature is not expected to drop below 50°F or exceed 120°F in a 24 hour period.
Wash tools in water before material dries.