Zetac
Improves Resistance to Water
Zetac is a high performance pavement sealer additive that enhances the adhesion and water resistance of the dried sealer film.
Uses
- Improves sealer durability by increasing water resistance.
- Promotes greater adhesion to pavement surfaces.
- Provides sand suspension and uniform application of sand slurry mixes.
Sizes Available
5 Gallon Pail, 55 gallon Drum
Mixing Procedures
With mixing tank agitator turning, add proper amount of water to pavement sealer concentrate. Following the addition of water, add 2% Zetac based upon pavement sealer concentrate (2 gallons of Zetac per 100 gallons of pavement sealer concentrate). When mix begins to thicken add sand slowly. Agitate thoroughly before and slowly during sealer application. Dilute Zetac 1:1 with water before adding to sealer mix to reduce polymer shock and promote uniformed dispersion.
Application
For optimum performance and durability apply 2 coats of properly mixed SealMaster pavement sealer fortified with Zetac. A third coat may be applied to high traffic areas such as entrances, exits, and drive lanes.
Important
Both surface and ambient temperature shall be a minimum of 50°F and rising before and during application. Temperatures shall not drop below 50°F in a 24 hour period following application. New asphalt surfaces should be allowed to cure a minimum of four weeks under ideal weather conditions (70°F) before applying SealMaster pavement sealer fortified with Top Tuff. KEEP OUT OF REACH OF CHILDREN. Do not store unopened drums or pails in freezing temperatures.