Asphalt Repair | Cold Patch | Driveway Repair | Parking Lot Repair
To properly maintain a driveway or parking lot, it’s important to prepare the asphalt surface prior to sealcoating. After cleaning and filling the cracks, it’s necessary to clean and fill potholes. SealMaster has you covered with PatchMaster premium cold patch. The industry standard for pothole repair, PatchMaster is the premium cold patch pothole patch with hot-mix performance. With specialty aggregate and advanced binders, PatchMaster sets up fast and firm in the pothole and can be applied in any weather.
SealMaster offers a full line of oil spot primers for sealing oil, gas and grease spots on pavement, and high-quality asphalt emulsion tack coats for use in priming asphalt surfaces, prior to patching or resurfacing.
When the work is done, SealMaster makes clean-up easy with our line of specialty cleaners designed for the removal of coal tar and asphalt pavement sealers from tools, equipment, vehicles and other surfaces.
Call (800) 395-7325 for the SealMaster nearest you!
Pothole Patch
PatchMaster – High Performance Pothole Patch
The Cold Patch with Hot Mix Performance!
- Easy to Use – Simply pour from bag and tamp or drive over with car wheels. No heating required
- PatchMaster can be applied in any weather
- Category – Asphalt Repair, Parking Lot Repair, Driveway Repair
AquaSet
Premium High Performance, Water-Activated Patching Material
- Easy to apply
- Sets up within minutes
- Highly durable
- All weather formula (wet or dry, hot or cold)
Sprayable Tack Coat
Tack-It™
Bituminous Joint Sealant & Tack Coat
- Repairing
- Patching
- Bonding
- Water-Proofing
Downloads:
SDS (PDF)
Spec Sheet (PDF)
Oil Spot Primer
Petro Seal
Concentrated Oil Spot Primer
- Can be diluted up to one part Petro Seal and two parts water
- Apply by spray or brush
- Category – Preparation Prior to Sealcoating
Prep Seal
Ready-to-Use Oil Spot Primer
- No dilution required
- Apply by spray or brush
- Category – Preparation Prior to Sealcoating
Detackifier
Tack Away™
Liquid Detackifier for Hot-Applied Crack Sealants
- Eliminates stickiness of freshly applied sealant
- Provides a barrier between tires and fresh sealant
- Compatible with all hot pour crack sealants (Will not attack or harm sealant)
Downloads:
SDS (PDF)
Spec Sheet (PDF)
Asphalt Binder
Asphalt Binder Plus
Polymer-Modified Asphalt Emulsion
- Asphalt Recycling Agent
- Pavement Rejuvenator/Fog Seal
- Crack Sealant For Road Application
- Category – Parking Lot Repair, Road Repair
Asphalt Binder
An Asphalt Emulsion Tack Coat Designed For Priming Oxidized Surfaces And Patchwork
- Promotes adhesion of bituminous concrete products and coatings
- Meets the ISSA requirements for SS1H
Tar & Sealer Clean-Up Products
TarBuster
The Environmentally Friendly, Fill Strength Tar and Asphalt Remover
- Non-Offensive Citrus Aroma.
- Fast Acting: In as little as 30 seconds you’ll see how TarBuster cuts cleanup time in the toughest cleaning applications.
Downloads:
SDS (PDF)
Tarpedo
Destroys & Quickly Dissolves Coal Tar Sealer!
- Use on tools, equipment and vehicles
- Rinses easily with water
- Category – Seal Coat Clean Up
Downloads:
SDS (PDF)
MasterFlo
Pavement Sealer Remover
- Removes coal tar, asphalt, and much more from a variety of surfaces
- Water soluble ready-to-use formula
- Can be used as a degreaser
- Category – Seal Coat Clean Up
Downloads:
SDS (PDF)
Mastic Material
CrackMaster Mastic Black
CrackMaster Mastic Black is a hot-applied, polymer-modified mastic asphalt binder; factory-blended with graded fillers, steel fibers, granite aggregates and recycled tire rubber. It is designed to replace traditional hot pour crack sealants which lack structural strength and other more rigid patches like cold patch or hot mix that are prone to failure due to their stiffness or poor quality. Meets ASTM D8260-20 hot-applied asphalt aggregate-filled mastic.
Downloads:
SDS (PDF)
Spec Sheet (PDF) – English
CrackMaster Mastic Gray
CrackMaster Mastic Gray is a hot-applied, synthetic polymer-modified resin compound containing mineral fillers, chopped fibers, and graded aggregates. It is designed to replace traditional cementitious pavement repairs, which are prone to failure due to their stiffness. CrackMaster Mastic Gray meets all requirements of ASTM D8260-20.
Downloads:
SDS (PDF)
Spec Sheet (PDF) – English
CrackMaster Mastic PL Parking Lot
CrackMaster Mastic PL Parking Lot is a hot-applied polymer modified asphalt mixed with specially designed aggregate and modifier combinations that is chosen to properly fill wide cracks and defects, thus allowing for prevention of water infiltration while restoring and improving traffic quality.
Downloads:
SDS (PDF)
Spec Sheet (PDF) – English
CrackMaster Mastic Roads
CrackMaster Mastic Roads is a hot-applied polymer modified asphalt mixed with specially designed aggregate and modifier combinations that is chosen to properly fill wide cracks and defects, thus allowing for prevention of water infiltration while restoring and improving traffic quality.
Downloads:
SDS (PDF)
Spec Sheet (PDF) – English