Sealcoat-Asphalt Based. Driveway Sealer. Parking Lot Sealer. MasterSeal. SealMaster.

Safe Ride

Bus Lane Coating

Safe Ride is primarily designed for bus lanes on asphalt streets and roads. Safe Ride provides a Designated Lane for buses and Safe Zone for loading passengers.

Features

  • Highly Durable 100% Acrylic Crosslinking Polymer Technology
  • Single Component Ready to Apply Coating
  • Highly visible red color provides a designated lane for buses and a safe zone for loading passengers

Sizes Available

5 Gallon Pail

Description

Safe Ride Red Bus Lane Coating is a 100% Acrylic Self-Crosslinking Polymer Emulsion designed as a highly durable pavement color coating. Safe Ride is fortified with specifically graded aggregate providing a textured surface for slip-resistance and added durability. Safe Ride is a single component ready-to-apply product.

Coverage

Apply a minimum of two coats. Apply at a rate of 50 square feet per gallon per coat. A third coat shall be applied for maximum durability. Allow material to dry between coats.

Surface Preparation

Surface must be clean from all oils, grease, loose materials, dirt and dust.

Mixing Procedures

Safe Ride is ready to use. Stir material thoroughly before applying.

Application

Apply Safe Ride by spray, brush or roller. If applying by spray, be sure to use an OSHA approved respirator for applying water based acrylic paints and coatings.

Important

Temperature must be a minimum of 50° F both during application and for a period of 24 hours after application. Do not apply if rain is imminent or forecast.

Clean Up

Wash tools in water. Use proper cleaner if material has dried.

Unit Size Unit Weight
5 Gallon Pail 72 lbs.

Download

SDS (PDF)
Spec Sheet (PDF) – English | Spanish
Engineering Spec
Catalog