SealMaster® Coal Tar Pavement Sealer
Coal Tar Pavement Sealer Exhibits Outstanding Fuel Resistance.
5 Gallon Pail, 55 Gallon Drum, Bulk
50 to 60 square feet per gallon for two coats depending on age, pavement porosity, and method of application.
* Colors may vary slightly from actual product.
SealMaster® Coal Tar Sealer is a coal tar emulsion sealer designed to protect and beautify asphalt pavement surfaces.
• Deep, Rich Black Color
• Oil and Fuel Resistant
• Reduced Fume Formulation For User Friendly Application
New asphalt surfaces must cure a minimum of four weeks under ideal weather conditions before application. Surface must be clean and free from all loose material, dirt, and dust. Cracks should be filled with SealMaster® Hot Pour or Cold Applied crack fillers. Treat all grease, oil, and gasoline stains with SealMaster® Petro Seal or Prep Seal.
For optimum results, mix SealMaster® Pavement Sealer in accordance with the following mix design (based on 100 gallons for ease of calculation):
SealMaster® Coal Tar Pavement Sealer: 100 gallons
Water: 30 – 40 gallons
Sand: 300 – 500 lbs.
Mix materials to a uniform consistency.
NOTE: A polymer latex additive (such as TopTuff or Sealer V.M.) may be added at the rate of 1-2% based on undiluted gallons of Coal Tar Sealer. Or, Zetac may be added at the rate of 1-2%.
Two coats of mixed material are recommended. Apply by squeegee, brush, or spray. Allow a minimum of 2 to 4 hours drying time before applying second coat. Allow 24 hours before parking cars or allowing traffic to resume.
Temperatures must be above 50°F both during application and for aperiod of at least 24 hours after application. Do not apply when rain is imminent or forecast.
Wash tools in water before material dries.