Tack-It
Tack-It is a spray-applied bituminous joint sealant and tack coat that improves adhesion and provides waterproofing protection for pavement repairs. Its ready-to-use aerosol formula makes it easy to treat paving joints, asphalt patches, utility cuts and other areas that need a reliable bond. Tack-It requires no mixing or specialized equipment and can be applied to damp surfaces. It is also ideal for manhole cover edges, sewer grate edges and roof repairs.
Features & Benefits
Improved Adhesion
Tack-It promotes adhesion between bituminous materials and treated surfaces. It is ideal for asphalt patching, paving joints and other pavement repair applications.
Waterproofing Protection
Tack-It serves as a bituminous sealant and waterproofing treatment for joints and repair areas.
Convenient Aerosol Application
Tack-It comes in a ready-to-use spray can for quick, controlled application. No mixing or specialized spray equipment is required.
Versatile Repair Applications
Tack-It can be used for asphalt patching, paving joints, utility cuts, manhole cover edges, sewer grate edges and roof repairs.
Damp Surface Application
No need to wait for the pavement to dry completely. Tack-It can be applied to damp surfaces once standing water and loose debris have been removed.
Application Guidelines
SealMaster
Tack-It
Bituminous Joint Sealant and Tack Coat
Surface Preparation
Remove dirt, loose debris and standing water from the surface before applying Tack-It.
Mixing Procedures
Tack-It is ready to use and requires no mixing or dilution.
Application
Shake the can for at least one minute after the mixing ball begins to rattle and occasionally throughout application. Invert the can and hold it approximately 8 to 12 inches above the surface. Apply Tack-It using long, even spray strokes. After application, turn the can upright and spray for a few seconds to clear the spray tip for future use.
Refer to the product’s technical specifications for more information regarding approved application methods, temperature requirements and drying times.
Coverage
When used as a primer, one full can of Tack-It covers approximately 33 square feet.
NOTE: Coverage may vary depending on the size and depth of the repair.
Important
Do not incinerate or crush empty aerosol cans. Dispose of empty cans with regular trash only where permitted by local regulations.
Available Sizes:
17 fl. oz. Spray Can (22 oz. total weight)