
Asphalt Binder Plus
Convenient Asphalt Bonding and Waterproofing
Asphalt Binder is an anionic asphalt emulsion designed to promote adhesion during pavement patching, paving and coating applications. It serves as a tack coat for bonding bituminous concrete materials and as a primer for pavement surfaces.
Asphalt Binder features an environmentally friendly, water-based formula that can be diluted to meet different application requirements. Its versatility makes it a practical solution for contractors and maintenance crews working on asphalt paving, pavement repairs and surface preparation.
Features & Benefits
Improved Adhesion
Asphalt Binder promotes a strong bond between existing pavement surfaces and newly applied bituminous materials.
Versatile Tack Coat & Primer
Asphalt Binder serves as a tack coat for patching and paving or as a primer for pavement coatings.
Water-Based Formula
- This environmentally friendly asphalt emulsion uses a water-based formulation.
Meets ISSA Requirements
Asphalt Binder meets the International Slurry Surfacing Association (ISSA) requirements for SS1h asphalt emulsion.
Application Guidelines
SealMaster
Asphalt Binder
Asphalt Emulsion Tack Coat & Primer
Surface Preparation
Remove dirt, dust and loose debris from the pavement surface before applying Asphalt Binder.
Mixing Procedures
Stir Asphalt Binder thoroughly before use. Dilute with water according to the intended application and mix until uniform.
Primer for Pavement Coatings
| Material | Amount |
|---|---|
| Asphalt Binder | 10 gal. |
| Water | 80 gal. |
Tack Coat for Patching or Paving
| Material | Amount |
|---|---|
| Asphalt Binder | 10 gal. |
| Water | 10 gal. |
Application
Stir Asphalt Binder thoroughly before application. Apply using spray equipment, a brush or a squeegee. Allow the material to dry before applying pavement coatings, patching materials or paving materials.
Refer to the product’s technical specifications for more information regarding approved application methods, temperature requirements and drying times.
Coverage
Primer for Pavement Coatings: One gallon of Asphalt Binder covers approximately 800 to 1,170 square feet (89 to 130 square yards) when diluted with 8 parts water.
Tack Coat for Patching or Paving: One gallon of Asphalt Binder covers approximately 180 to 260 square feet (20 to 29 square yards) when diluted with 1 part water.
NOTE: Coverage varies depending on the application and pavement conditions.
Important
Apply coatings, patching materials, or paving materials as soon as possible after Asphalt Binder dries (within 24 hours) to maintain tackifying properties.
Available Sizes:
5-Gallon Pail – 46 lbs. | 55-Gallon Drum – 515 lbs. | Bulk

