Safe Ride Bus Lane Coating
High-Visibility Red Coating for Dedicated Bus Lanes
Safe Ride Bus Lane Coating is a durable, 100% acrylic bus lane paint coating designed to create highly visible red surfaces on asphalt streets and roadways. Its bright red color helps clearly identify designated bus lanes and passenger loading areas while improving visibility in busy urban environments.
Formulated with self-crosslinking polymer technology, Safe Ride provides added durability for demanding roadway applications. Specially graded aggregates create a textured, slip-resistant finish for improved traction and wear resistance. The single-component formula comes ready to apply for convenient application.
Features & Benefits
Highly Visible Red
Safe Ride Bus Lane Coating provides a bright red finish that clearly identifies designated bus lanes and passenger loading areas. The highly visible color helps distinguish bus-only lanes from surrounding traffic.
100% Acrylic Technology
Formulated with 100% acrylic self-crosslinking polymer technology, Safe Ride Bus Lane Coating provides a durable finish designed to withstand traffic and everyday roadway conditions.
Textured, Slip-Resistant Finish
- Safe Ride Bus Lane Coating is fortified with specifically graded aggregate to provide a textured surface for slip resistance and added durability.
Ready to Apply
Safe Ride Bus Lane Coating comes ready to apply with no additional dilution required. The single-component formula simplifies preparation and application for professional pavement contractors.
Recommended Uses:
- Bus Lanes
- Passenger Loading Areas
- City Streets
- High-Traffic Roadways
Application Guidelines
SealMaster
Safe Ride Bus Lane Coating
100% Acrylic Bus Lane Coating
Surface Preparation
Proper surface preparation is essential for a long-lasting, successful application. The pavement surface must be clean and free of oil, grease, loose material, dirt and dust.
Before Application:
- Make pavement repairs with a suitable asphalt mix
- Fill cracks with SealMaster or SportMaster acrylic-based crack filling products
- Remove oil, grease, dirt, dust and loose material from the surface
Mixing Procedures
Safe Ride Bus Lane Coating is ready to use. Stir material thoroughly before application.
Application
Apply Safe Ride Bus Lane Coating by spray, brush or roller. Apply a minimum of two coats, allowing the material to dry between coats. A third coat should be applied for maximum durability.
If applying by spray, use an OSHA-approved respirator for applying water-based acrylic paints and coatings.
Important:
Temperatures must be above 50°F during application and remain so for at least 24 hours afterward. Do not apply when rain is imminent or forecast.
Coverage
One gallon of Safe Ride Bus Lane Coating will cover approximately 50 square feet per coat. A minimum of two coats is recommended, with a third coat applied for maximum durability.
NOTE: Coverage rates may vary depending on the pavement age, porosity and application method.
Available Sizes:
5-Gallon Pail – 72 lbs.
Available Colors:
Red
Need Help with your Safe Ride Project?
Not sure which Safe Ride products are right for your project? SealMaster’s highly trained professionals can help you select the appropriate products for your application. Contact SealMaster today to speak with one of our professionals.