Safe Ride Bicycle Lane Coating
Durable Green Bike Lane Paint for Asphalt Roads
Safe Ride Bicycle Lane Coating is a 100% acrylic green bike lane paint formulated with self-crosslinking polymer technology for added durability. Designed for bicycle lanes on asphalt streets and roads, Safe Ride creates a highly visible green surface that helps distinguish designated bicycle lanes in urban environments and other high-traffic roadways.
The coating is fortified with specially graded aggregate for a textured, slip-resistant finish. Its bright green color meets Manual on Uniform Traffic Control Devices (MUTCD) requirements for daytime and nighttime chromaticity. Safe Ride features a single-component, ready-to-apply formula that eliminates the need to mix multiple components before application.
Features & Benefits
Meets MUTCD Green Color Requirements
Safe Ride Bicycle Lane Coating meets MUTCD requirements for green daytime and nighttime chromaticity, providing consistent color for designated bicycle lanes.
100% Acrylic Technology
Formulated with 100% acrylic self-crosslinking polymer technology, Safe Ride provides a durable pavement coating designed to withstand the demands of bicycle lane applications.
Textured, Slip-Resistant Finish
- Safe Ride Bicycle Lane Coating is fortified with specifically graded aggregate to provide a textured surface for slip resistance and added durability.
Ready to Apply
Safe Ride features a single-component, ready-to-apply formula that eliminates the need to measure and mix multiple components before application.
Highly Visible Green
- Safe Ride Bicycle Lane Coating provides the highly visible green color used to designate bicycle lanes on streets and roadways.
Recommended Uses:
- Designated Bicycle Lanes
- City Streets
- High-Traffic Roadways
- Intersections
- Crosswalk Areas
Application Guidelines
SealMaster
Safe Ride Bicycle Lane Coating
100% Acrylic Bicycle Lane Coating
Surface Preparation
Proper surface preparation is essential for a long-lasting, successful application. The pavement surface must be clean and free of oil, grease, loose material, dirt and dust.
Before Application:
- Make pavement repairs with a suitable asphalt mix
- Fill cracks with SealMaster or SportMaster acrylic-based crack filling products
- Remove oil, grease, dirt, dust and loose material from the surface
Mixing Procedures
Safe Ride Bicycle Lane Coating is ready to use. Stir material thoroughly before application.
Application
Apply Safe Ride Bicycle Lane Coating by spray, brush or roller. Apply a minimum of two coats, allowing the material to dry between coats. A third coat should be applied in high-wear, high-traffic areas including intersections and crosswalks.
Use an OSHA-approved respirator when applying this product. If applying by spray, use an OSHA-approved respirator for applying water-based acrylic paints and coatings.
Important:
Temperatures must be above 50°F during application and remain so for at least 24 hours afterward. Do not apply when rain is imminent or forecast.
Coverage
Apply Safe Ride Bicycle Lane Coating at a rate of approximately 50 sq. ft. per gallon per coat. Two to three coats are recommended for optimum durability and performance.
NOTE: Coverage rates may vary depending on the pavement age, porosity and application method.
Available Sizes:
5-Gallon Pail – 72 lbs.
Available Colors:
Green
Make Safe Ride Application Simple
Make green bike lane applications faster and easier with the Safe Ride Application Kit. Designed for efficient application and consistent coverage, this versatile system helps contractors get the job done with less hassle.
Need Help with your Safe Ride Project?
Not sure which Safe Ride products are right for your project? SealMaster’s highly trained professionals can help you select the appropriate products for your application. Contact SealMaster today to speak with one of our professionals.