PMM Ultra Pavement Sealer
Ready-to-Apply with Polymer-Modified Performance
PMM Ultra is a polymer-modified asphalt emulsion pavement sealer designed to provide added durability and protection while restoring the appearance of asphalt pavement. Combining the performance benefits of Polymer Modified MasterSeal with ready-to-apply convenience, PMM Ultra provides added strength, adhesion and flexibility in a high-solids formula. The result is a durable, slip-resistant coating that helps protect asphalt pavement while restoring a deep, rich black finish.
Features & Benefits
Factory Blended for Consistent Quality
PMM Ultra is factory blended with aggregate and polymer to provide a consistent formula from batch to batch.
Ready to Apply
PMM Ultra simplifies jobsite preparation by eliminating the need to add and mix aggregate before application. Thoroughly mix the material, and it’s ready to apply.
Polymer-Modified Performance
PMM Ultra is polymer-modified for added strength, adhesion and flexibility to provide increased durability and performance.
High-Solids Formula
PMM Ultra is factory blended with specifically graded aggregate and applied at 48-55% solids, compared with conventional sealers applied at 40% solids, for enhanced durability.
Deep, Rich Black Finish
PMM Ultra restores faded asphalt with a uniform, deep-black finish, creating a clean, well-maintained look that enhances curb appeal.
Protective Barrier
PMM Ultra replenishes binder lost through weathering and aging while forming a protective barrier against moisture, UV rays, chemicals and salt to preserve and extend the life of the pavement.
User-Friendly Application
PMM Ultra provides a user-friendly application experience without the irritating fumes associated with other pavement sealer formulations.
Recommended Uses:
- Parking Lots
- Driveways
- Low-Traffic Roads
- Low-Speed Roads
- Airports
- Roadways
- Shopping Malls
- Highway Shoulders
Application Guidelines
SealMaster
Polymer-Modified MasterSeal (PMM) Ultra
Asphalt Emulsion Pavement Sealer
Surface Preparation
Proper surface preparation is essential for a long-lasting, successful sealcoat. For newly paved asphalt surfaces, allow a minimum curing time of four weeks under ideal weather conditions (around 70°F) before applying. All surfaces must be clean and free of loose material, dirt and dust.
Before Sealcoating:
- Fill pavement cracks with SealMaster hot-pour or cold-applied crack filler
- Treat grease, oil and gasoline stains with SealMaster PetroSeal or PrepSeal
- Remove dirt, dust and loose material from the pavement surface
Mixing Procedures
Mix PMM Ultra thoroughly before application. If needed, a small amount of water may be added to facilitate application.
Application
For optimum performance and durability, apply a minimum of two coats of Polymer Modified MasterSeal (PMM) Ultra.
A third coat may be applied in high-traffic areas such as parking lot entrances, exits and drive lanes for added durability. Allow each coat to dry thoroughly before applying the next coat. After the final application, allow 24 hours before opening the pavement to vehicle traffic.
Important:
Temperatures must be above 50°F during application and remain so for at least 24 hours afterward. Do not apply when rain is imminent or forecast.
Coverage
When properly mixed and applied, one gallon of PMM Concentrate will cover approximately 70-82 sq. ft. per coat or 7.75-9.1 sq. yd. per coat.
NOTE: Coverage rates may vary depending on the pavement age, porosity and application method.
Available Color:
Black
Looking for a Concentrated Pavement Sealer?
Find the Right Pavement Sealer for Your Project
Not sure which pavement sealer is right for your project? SealMaster’s highly trained professionals can evaluate your pavement, recommend the right products and determine the appropriate mix design for your application. Contact SealMaster today to schedule a free pavement inspection or speak with one of our professionals.