
MasterSeal Pavement Sealer
Formulated to Protect and Beautify Asphalt Pavement
MasterSeal is a mineral-filled asphalt emulsion sealer designed to protect and beautify all types of asphalt pavement. Its flexible, user-friendly formula helps replenish binder lost through weathering and aging while forming a protective barrier against moisture, UV rays, chemicals and salt. MasterSeal asphalt emulsion sealer restores faded asphalt with a deep, rich black finish while helping preserve and extend the life of the pavement.

Features & Benefits
Deep, Rich Black Finish
MasterSeal restores faded asphalt with a uniform, deep-black finish, creating a clean, well-maintained look that enhances curb appeal.
Protective Barrier
MasterSeal replenishes binder lost through weathering and aging while forming a protective barrier against moisture, UV rays, chemicals and salt to preserve and extend the life of the pavement.
Flexible Formula
MasterSeal’s flexible formula helps resist check cracking caused by the natural expansion and contraction of asphalt pavement.
User-Friendly Application
MasterSeal provides a user-friendly application experience without the irritating fumes associated with other pavement sealer formulations.
Recommended Uses:
- Parking Lots
- Driveways
- Low-Traffic Roads
- Low-Speed Roads
- Airports
- Shopping Malls
- Highway Shoulders
Application Guidelines
SealMaster
MasterSeal
Asphalt Emulsion Pavement Sealer
Surface Preparation
Proper surface preparation is essential for a long-lasting, successful sealcoat. For newly paved asphalt surfaces, allow a minimum curing time of four weeks under ideal weather conditions (around 70°F) before applying. All surfaces must be clean and free of loose material, dirt and dust.
Before Sealcoating:
- Fill pavement cracks with SealMaster hot-pour or cold-applied crack filler
- Treat grease, oil and gasoline stains with SealMaster PetroSeal or PrepSeal
- Remove dirt, dust and loose material from the pavement surface
Mixing Procedures
For optimum results, mix MasterSeal to a uniform consistency using the recommended mix design. Based on 100 gallons of MasterSeal for ease of calculation.
| Material | Amount |
|---|---|
| MasterSeal | 100 gal. |
| Water | 15-25 gal. |
| TopTuff Polymer Additive | 1/2 – 2 gal. |
| Sand (40-70 Mesh AFS) | 100-400 lbs. |
Application
For optimum performance and durability, apply a minimum of two coats of MasterSeal.
A third coat may be applied in high-traffic areas such as parking lot entrances, exits and drive lanes for added durability. Allow each coat to dry thoroughly before applying the next coat. After the final application, allow 24 hours before opening the pavement to vehicle traffic.
Important:
Temperatures must be above 50°F during application and remain so for at least 24 hours afterward. Do not apply when rain is imminent or forecast.
Coverage
When properly mixed and applied, one gallon of MasterSeal Concentrate will cover approximately 100-120 sq. ft. per coat or 11.1-13.3 sq. yd. per coat.
NOTE: Coverage rates may vary depending on the pavement age, porosity and application method.
Available Sizes:
5-Gallon Pail – 52 lbs. | 55-Gallon Drum – 580 lbs. | Bulk
Available Color:
Black


Looking for a Ready-to-Apply Option?
MasterSeal Ultra is factory blended with water, aggregate and polymer for convenient, ready-to-apply use. Get the proven protection and rich black finish of MasterSeal with less mixing, material handling and preparation.
Find the Right Pavement Sealer for Your Project
Not sure which pavement sealer is right for your project? SealMaster’s highly trained professionals can evaluate your pavement, recommend the right products and determine the appropriate mix design for your application. Contact SealMaster today to schedule a free pavement inspection or speak with one of our professionals.

