ColorPave Neutral Ready-Mix
A More Convenient Way to Add Color
ColorPave Neutral Ready-Mix is a 100% acrylic, water-based colored driveway sealer designed to protect and beautify asphalt pavement. The formula comes factory-blended with silica sand, eliminating the need to measure and add aggregate on the jobsite. Contractors simply mix one 24-ounce bottle of ColorPlus Tint into each pail to achieve their desired color.
ColorPave Neutral Ready-Mix creates a durable, textured finish that enhances pavement appearance and provides improved slip resistance. In addition to residential driveways, ColorPave is ideal for parking lots, bike paths, walkways, jogging paths, playgrounds and other recreational areas. The ColorPlus Fusion System offers 17 standard colors and more than 100 color variations.
Features & Benefits
Pre-Mixed with Silica Sand
ColorPave Neutral Ready-Mix comes factory-blended with silica sand, eliminating the need to measure and add aggregate on the jobsite. This convenient formula simplifies preparation and helps ensure consistent mixing for every application.
Simple Job-Site Mixing
ColorPave Neutral Ready-Mix requires only the addition of ColorPlus Tint to achieve the desired color. Simply mix one 24-ounce bottle of ColorPlus Tint into each pail and stir thoroughly before application.
Wide Range of Color Options
The ColorPlus Fusion System offers 17 standard colors and more than 100 color variations. Contractors can create customized colored pavement finishes for residential driveways, parking lots, walkways and recreational areas.
100% Acrylic Formula
- ColorPave Neutral Ready-Mix features a 100% acrylic, water-based formula designed to provide a durable pavement coating.
Fuel & UV Resistant
ColorPave Neutral Ready-Mix’s formula resists fuel and ultraviolet rays for lasting performance.
Versatile Applications
ColorPave Neutral Ready-Mix can be applied to asphalt, stamped asphalt and existing compatible acrylic surfaces for both functional and decorative applications.
Recommended Uses:
- Driveways
- Parking Lots
- Bike Paths
- Walkways & Jogging Paths
- Playgrounds & Recreational Areas
- Golf Cart Paths
- Sport Court Surfaces
- Amusement Parks & Zoos
Application Guidelines
SealMaster
ColorPave Neutral Ready-Mix
100% Acrylic Color Coating
Surface Compatibility
ColorPave can be applied to asphalt, stamped asphalt and existing acrylic surfaces. Pavement areas previously coated with an acrylic-based color coating can also be resurfaced using ColorPave.
IMPORTANT: Do NOT apply ColorPave products to pavement surfaces that have previously been sealed with coal tar or asphalt-based sealers.
Before Application:
- Make pavement repairs with a suitable asphalt mix
- Fill cracks with SealMaster or SportMaster acrylic-based crack filling products
- Remove oil, grease, dirt, dust and loose material from the surface
Surface Preparation
Proper surface preparation is essential for a long-lasting, successful application. The pavement surface must be clean and free of oil, grease, loose material, dirt and dust.
IMPORTANT: Do NOT use hot-applied crack filling materials prior to applying ColorPave.
Mixing Procedures
For optimum results, thoroughly mix ColorPave Neutral Ready-Mix with ColorPlus Tint to a uniform consistency.
| Material | Amount |
|---|---|
| ColorPave Neutral Ready-Mix | 5 gal. Pail |
| ColorPlus Tint | 24 oz. Jar |
Application
Apply ColorPave Neutral Ready-Mix by squeegee, brush, roller or specialized textured spray equipment. Two coats are recommended for optimum performance.
Important:
Temperatures must be above 50°F during application and remain so for at least 24 hours afterward. Do not apply when rain is imminent or forecast.
Coverage
One pail (4.5 gallons) of ColorPave Neutral Ready-Mix will cover approximately 270–310 sq. ft. per coat or 26.8–31.2 sq. yd. per coat.
NOTE: Coverage rates may vary depending on the pavement age, porosity and application method.
Available Sizes:
5-Gallon Pail (Net 4.5 Gallons) – 56 lbs.
Available Colors:
Available in 17 standard colors plus more than 100 color variations through the ColorPlus Fusion System.
Create Custom Colors with ColorPlus Tint
ColorPlus Tint is designed for mixing with ColorPave Neutral Ready-Mix to create a wide variety of decorative pavement colors. The ColorPlus Fusion System offers 17 standard colors and more than 100 color variations for residential, commercial and recreational applications.
Need Help Choosing the Right ColorPave Product?
Not sure which ColorPave products are right for your project? SealMaster’s highly trained professionals can help you select the appropriate products for your application. Contact SealMaster today to speak with one of our professionals.