ColorPave HD Clear Coat
Protect and Enhance Your ColorPave Finish
ColorPave HD Clear Coat is a 100% acrylic clear asphalt sealer specifically formulated to protect ColorPave HD 500 colored asphalt coatings. This ready-to-use protective topcoat provides an additional barrier against UV rays, moisture, oil, gas and chemicals to help extend the service life of decorative asphalt surfaces.
Its clear-drying formula produces a semi-gloss finish that enhances the color and appearance of ColorPave HD 500 coatings. It helps minimize the appearance of tire marks, dirt and grime while maintaining the finished look of stamped and imprinted asphalt surfaces.
Features & Benefits
Protection Against Weather and Chemicals
ColorPave HD Clear Coat provides an additional protective barrier against UV rays, moisture, oil, gas and chemicals to help preserve the underlying ColorPave HD 500 coating.
Helps Extend Coating Service Life
The 100% acrylic formula provides added protection against everyday wear and exposure, helping extend the service life of ColorPave HD 500 surfaces.
Enhances Color and Appearance
The clear-drying formula creates a semi-gloss finish that enhances the appearance of colored asphalt coatings while helping minimize visible tire marks, dirt and grime.
Ready-to-Use Formula
ColorPave HD Clear Coat comes ready for application without dilution. It can be applied by spray, brush or roller.
Application Guidelines
SealMaster
ColorPave HD Clear Coat
100% Acrylic Protective Clear Coat
Recommended Uses
ColorPave HD Clear Coat is to be used as a protective top coat over ColorPave HD 500.
Mixing Procedures
ColorPave HD Clear Coat is ready to use. Do NOT dilute. Stir thoroughly before application.
Application
Apply ColorPave HD Clear Coat by spray, brush or roller. Apply one coat at a rate of approximately 0.04 gallons per square yard. Do NOT apply ColorPave products to pavement surfaces that have previously been sealed with coal tar or asphalt-based sealers.
Important:
Temperatures must be above 50°F during application and remain so for at least 24 hours afterward. Do not apply when rain is imminent or forecast.
Coverage
One gallon of ColorPave HD Clear Coat will cover approximately 200 sq. ft. or 22 sq. yd. per coat. One 5-gallon pail will cover approximately 1,000 sq. ft. or 110 sq. yd. per coat.
NOTE: Coverage rates may vary depending on the pavement age, porosity and application method.
Available Sizes:
5-Gallon Pail – 46 lbs.
Need Help Choosing the Right ColorPave Product?
Not sure which ColorPave products are right for your project? SealMaster’s highly trained professionals can help you select the appropriate products for your application. Contact SealMaster today to speak with one of our professionals.