Dust Suppressant
Reliable Dust Suppression for a Variety of Applications
Dust Suppressant & Soil Stabilizer is a concentrated synthetic polymer emulsion designed for dust suppression and soil stabilization applications. Its specially selected polymers provide strong bonding and stabilizing properties to help maintain unpaved surfaces and deliver lasting performance.
The environmentally friendly, non-toxic formula is suitable for a wide range of traffic and non-traffic applications. Dust Suppressant & Soil Stabilizer can be used on gravel roads, construction sites, agricultural roads, walking trails and other surfaces where dust control and soil stability are essential.
Features & Benefits
Synthetic Polymer Formulation
Dust Suppressant & Soil Stabilizer is formulated with a combination of carefully selected synthetic polymers designed to provide superior bonding and stabilization for lasting performance.
Effective Dust Suppression
The polymer emulsion helps control dust on unpaved roads, gravel surfaces, construction sites and other areas exposed to vehicle traffic or environmental conditions.
Soil Stabilization
Dust Suppressant & Soil Stabilizer bonds loose soil and aggregate materials to help stabilize unpaved surfaces and improve surface integrity.
Environmentally Friendly Formula
The synthetic polymer emulsion is formulated to be non-toxic and environmentally friendly for dust suppression and soil stabilization applications.
Versatile Application Methods
Dust Suppressant & Soil Stabilizer can be applied using pressurized spray equipment, distributor trucks, spray trailers or hand sprayers.
Optional Pigmented Applications
Dust Suppressant & Soil Stabilizer can be pigmented for applications requiring a colored finish. Pigment is sold separately.
Recommended Uses:
- Unpaved roads and gravel roads
- Agricultural roads and heavy haul roads
- Gravel parking lots
- Walking paths, ADA trails and cart paths
- Construction sites and military operations
- Quarries and stockpiles
- Slope erosion control
- Hydroseed and mulch tackifier applications
- Helicopter and aircraft runways
- Sub-base stabilization mixed up to 6 inches deep
- Dust control for traffic and non-traffic applications
Application Guidelines
SealMaster
Dust Suppressant & Soil Stabilizer
Synthetic Polymer Emulsion
Surface Preparation
Application
Apply Dust Suppressant & Soil Stabilizer evenly using pressurized spray equipment, distributor trucks, spray trailers or hand sprayers. Two applications may be required to achieve the recommended coverage rate.
After application, level the treated material as needed and compact the surface with a roller. Once the material has been rolled, apply a light final coat over the surface to lock down the treated material. Allow 24 hours for the material to set before reopening the surface to traffic.
Refer to the product’s technical specifications for more information regarding approved application methods, temperature requirements and drying times.
Coverage
Coverage requirements vary depending on the application, surface conditions and intended use.
Important: Temperatures must be above 50°F during application and remain so for at least 24 hours afterward. Do not apply if rain is forecast or imminent.
Available Sizes:
55-Gallon Drum – 535 lbs.| 275-Gallon Tote – 2,700 lbs. | Bulk