Crack Filling Equipment | Cold Pour Crack Sealing Equipment | Crack Filling Application Equipment | Pump System for Cold Applied Crack Sealants

CrackPro pump systems set the industry standard for portable cold-applied pourable crack filler applicators. CrackPro Cold-applied crack filler applicator units are available in several sizes. CrackPro portable units are designed to draw cold applied crack sealants from pails and drums and pump through a hose and wand directly into cracks. Also ideal for spraying pavement sealers with and water base tack coats.

Crack Filling Equipment for cold-Applied crack filler, Cold Pour crack sealant pump system, Portable pump systems for crack sealant

CrackPro 3500 Cold-Pour Crack Filler Application Unit

Ease, Convenience, & High Performance

CrackPro 3500 Standard Features:

  • 50-foot hose and spray wand
  • Air wand attachment for blowing out cracks
  • Dependable Low Maintenance Air-driven Dual Diaphragm Material Pump-shifts to neutral automatically when wand is shut off. 1 ½ inch material discharge outlet.
  • Crack Shoe and Straight Pipe Applicator Attachments
  • 9 H.P. Honda Engine
  • Basket Strainer to reduce clogging
  • Suction Hose for pails and drums
  • Also sprays pavement sealer with sand and tack coats

Specifications:

  • Engine: 9 H.P. Honda
  • Material Pump:
    – Type: Air-operated Dual Diaphragm
    – Discharge: 1 1/2″
  • Air Compressor:
    – SCFM: 24
    – PSIG: 125
  • Height: 50″
  • Width: 25″
  • Length: 56″
  • Weight: 440 lbs.

Catalog Page (PDF)
Manual (PDF)

Crack Sealing Equipment for Cold Pour,Portable Pump System for Cold Applied Crack Filler, Crack Filling and Crack Sealing

CrackPro 3000 Cold-Pour Crack Filler Application Unit

The Portable Solution for Applying Cold Pour Crack Sealants

CrackPro 3000 Standard Features:

  • 50-foot hose and spray wand
  • Dependable Low Maintenance Air-driven Dual Diaphragm Material Pump-shifts to neutral automatically when wand is shut off. 1- inch material discharge outlet.
  • Crack Shoe and Straight Pipe Applicator Attachments
  • 5.5 H.P. Honda Engine
  • Basket Strainer to reduce clogging
  • Suction Hose for pails and drums
  • Also sprays pavement sealer with sand and tack coats

Specifications:

  • Engine: 5.5 H.P. Honda
  • Material Pump:
    – Type: Air-operated Dual Diaphragm
    – Discharge: 1″
  • Air Compressor:
    – SCFM: 14.6
    – PSIG: 125
  • Height: 33″
  • Width: 22″
  • Length: 41″
  • Weight: 220 lbs.

Catalog Page (PDF)
Manual (PDF)

Crack filling and sealing equipment, Portable pump system for crack filler

CrackPro 2000

Economical pump unit that plugs into any air compressor (10 cfm or higher)
(Requires Separate Air Compressor)

CrackPro 2000 Standard Features:

  • Use your own compressor- minimum 10 cfm
  • 50-foot hose and spray wand
  • Crack Shoe and Straight Pipe Applicator Attachments
  • Dependable Low Maintenance Air-driven Dual Diaphragm Material Pump-shifts to neutral automatically when wand is shut off. 1- inch material discharge outlet. (Requires separate air compressor to operate)
  • Basket Strainer to reduce clogging
  • Suction Hose for pails and drums
  • Also sprays pavement sealer with sand and tack coats

Specifications:

  • Width: 23″
  • Length: 30″
  • Weight: 114 lbs.
  • Flow Rate: 20 GPM
  • Pressure: 100 PSI

Catalog Page (PDF)
Manual (PDF)