LoopMaster

Rubberized Traffic Loop Sealant

Protective Sealant for Traffic Induction Loops

  • Rubberized asphalt emulsion provides a waterproof protective seal
  • Designed for inductive loop saw cuts up to ½ inch wide
  • Helps protect traffic loop wires against moisture intrusion
  • Ready-to-use, cold-applied formula is economical and easy to apply
LoopMaster Traffic Loop Sealant
Protect Traffic Induction Loops from Moisture

LoopMaster is a one-component, rubberized asphalt emulsion loop sealant designed for filling inductive loop saw cuts up to ½ inch wide in pavement surfaces. Its rubberized formula provides a waterproof protective seal over traffic loop wires and creates a barrier against moisture intrusion.

Ready to use and cold-applied, LoopMaster is an economical, easy-to-apply solution for traffic induction loops at intersections and in parking areas.

Features & Benefits

Rubberized Asphalt Emulsion

  • LoopMaster features a rubberized asphalt emulsion formula that provides a waterproof protective seal over traffic loop wires in pavement.

Protective Moisture Barrier

  • LoopMaster creates a protective barrier against moisture intrusion into inductive loops.

Fills Loops Up to ½ Inch Wide

  • LoopMaster is designed for filling inductive loop saw cuts up to ½ inch wide in pavement surfaces.

Ready-to-Use Formula

  • LoopMaster is a one-component, ready-to-use material that does not require dilution before application.

Cold-Applied Convenience

  • LoopMaster is cold-applied, providing an economical and easy-to-use solution without the need for heating.

Application Guidelines

SealMaster

LoopMaster

Rubberized Traffic Loop Sealant
Surface Preparation

Clean all vegetation, dirt and loose debris from the crack. Fill deep cracks with sand or backer rod to within ¾ inch of the pavement surface.

Mixing Procedures

Stir LoopMaster thoroughly before use. LoopMaster is ready to use. Do not dilute.

Application

Pour LoopMaster into the saw cut and squeegee flush with the adjoining pavement surface. Allow the material to dry before opening to traffic.

Important:

Temperatures must be above 50°F during application and remain so for at least 24 hours afterward. Do not apply when rain is imminent or forecast. Wear appropriate eye protection during application.

Coverage

Typically, one gallon of LoopMaster will fill approximately 75-150 linear feet of cracks.

NOTE: Actual coverage will vary depending on the depth and width of cracks.

Available Sizes:

1-Gallon Jug – 11 lbs.| 5-Gallon Pail – 53 lbs. | 55-Gallon Drum – 590 lbs.

Reliable Protection for Traffic Induction Loops

LoopMaster provides a rubberized, waterproof protective seal over traffic loop wires to help protect inductive loops against moisture intrusion. Its ready-to-use, cold-applied formula makes it an economical and easy-to-apply solution for intersections, parking areas and other traffic loop applications.