FlexMaster®

Elastomeric Crack Sealant

Flexible Crack Sealant for Asphalt & Concrete Pavement

  • Highly polymer-modified asphalt emulsion provides outstanding adhesion and flexibility
  • Designed for filling cracks up to ½ inch wide in asphalt and concrete pavement
  • Exhibits low-temperature flexibility for dependable crack sealing performance
  • Environmentally friendly, water-based formula
FlexMaster Elastomeric Crack Filler

Enhanced Adhesion and Flexibility

FlexMaster is a highly polymer-modified, elastomeric crack filler designed to seal cracks up to ½ inch wide in asphalt and concrete pavement. Its advanced formula provides excellent adhesion and flexibility, including low-temperature flexibility, for durable crack repairs.

This water-based, cold-applied crack sealant provides contractors with a convenient solution for asphalt and concrete crack repair. Its flexible formulation helps accommodate pavement movement while creating a protective seal against moisture intrusion.

Features & Benefits

Outstanding Adhesion & Flexibility

  • FlexMaster is a highly polymer-modified asphalt emulsion formulated to provide outstanding adhesion and flexibility when filling cracks in asphalt and concrete pavement.

Elastomeric Performance

  • FlexMaster provides elastomeric properties that help the crack sealant remain flexible after application for dependable pavement crack repair.

Low-Temperature Flexibility

  • FlexMaster exhibits low-temperature flexibility to help maintain crack sealing performance as temperatures change.

Water-Based Formula

  • FlexMaster features an environmentally friendly, water-based formula for convenient application and water cleanup before the material dries.

Application Guidelines

SealMaster

FlexMaster

Elastomeric Crack Sealant
Surface Preparation

Clean all vegetation, dirt and loose debris from the crack. Fill deep cracks with sand or backer rod to within ¾ inch of the pavement surface.

Mixing Procedures

Stir material thoroughly. FlexMaster Crack Sealant is a ready-to-use material. Do not dilute.

Application

Cut the tip of the spout to the desired opening. Fill the crack completely with FlexMaster. A U-shaped squeegee may be used to spread the material flush with the adjoining pavement surface. FlexMaster should skin over sufficiently to accept traffic within approximately 4 to 6 hours after application.

Important:

Temperatures must be above 50°F during application and remain so for at least 24 hours afterward. Do not apply when rain is imminent or forecast.

Coverage

Typically, one gallon of FlexMaster will fill approximately 75-150 linear feet of cracks.

NOTE: Actual coverage will vary depending on the depth and width of cracks.

Available Sizes:

1-Gallon Jug– 10 lbs. | 5-Gallon Pail – 50 lbs. | 55-Gallon Drum – 550 lbs.

Professional Crack Sealing Without the Melter

TruFlex combines cold-pour convenience with the flexibility, toughness and resistance needed for high-performance pavement crack sealing. Contact your local SealMaster professional to learn more about TruFlex and find the right crack repair solution for your pavement.