
Concrete Patch
Ready-To-Use Concrete Patching Made Simple
Concrete Patch is a heavy-bodied, 100% acrylic patching material designed to fill cracks and repair damaged concrete surfaces. Its mineral-filled, trowel-grade formula fills cracks up to 1 inch wide and repairs spalled areas up to 1/4 inch deep.
It is supplied ready to use and requires no dilution. The water-based formula is suitable for interior and exterior applications and can be applied with a trowel or wide putty knife.

Features & Benefits
Heavy-Bodied Acrylic Formula
Concrete Patch features a 100% acrylic, mineral-filled formula designed for filling cracks and repairing damaged concrete surfaces.
Concrete Crack Repair
The trowel-grade material fills concrete cracks up to 1 inch wide, helping restore damaged areas.
Surface Patching
Concrete Patch repairs spalled and damaged concrete surfaces up to 1/4 inch deep.
Ready-to-Use Formula
Concrete Patch is supplied ready to use and requires no dilution, reducing preparation time before application.
Easy Trowel Application
- The heavy-bodied consistency allows for application with a trowel or wide putty knife.
Interior & Exterior Applications
The water-based acrylic formula is suitable for concrete maintenance and repair projects in indoor and outdoor environments.
Recommended Uses:
- Concrete Driveways
- Concrete Sidewalks and Walkways
- Concrete Parking Lots
- And More!
Application Guidelines
SealMaster
Concrete Patch
Acrylic Concrete Patching Material
Surface Preparation
Concrete surfaces must be clean and free of dirt, dust, debris and other contaminants before application. Remove loose or deteriorated material from cracks and damaged areas to ensure proper adhesion.
Mixing Procedures
Concrete Patch is ready to use and requires no dilution. Stir thoroughly before application.
Application
Apply Concrete Patch using a trowel or wide putty knife. Work the material into cracks or damaged areas and smooth the surface to the desired finish. Allow a minimum of 48 hours of curing before opening repaired areas to traffic.
Refer to the product’s technical specifications for more information regarding approved application methods, temperature requirements and drying times.
Coverage
One gallon of Concrete Patch fills approximately 75 to 150 linear feet of cracks.
NOTE: Coverage may vary depending on crack width, depth and surface conditions.
Important:
Temperatures must be above 50°F during application and remain so for at least 24 hours afterward. Do not apply if rain is forecast or imminent.
Available Sizes:
1-Gallon Pail– 17 lbs.
Available Colors:
Natural Sand

