
Concrete Patch Binder
Strengthen Concrete Repairs with Acrylic Binding Technology
Concrete Patch Binder is a 100% acrylic liquid emulsion designed to improve the strength and performance of concrete repair and resurfacing mixes. When combined with Portland cement and sand, it creates a durable patching material with improved adhesion, flexibility and resistance to wear.
It is suitable for concrete patching, resurfacing and thin overlay applications. Its water-based acrylic formula enhances flexural, adhesive and impact strength while improving resistance to abrasion and industrial chemicals.
Features & Benefits
Improved Adhesion & Bond Strength
Concrete Patch Binder enhances the adhesive strength of cement-based repair mixes, promoting a stronger bond to existing concrete and masonry surfaces.
Increased Flexural Strength
The 100% acrylic formula improves the flexural strength of concrete repair mixes, helping them withstand stress during service.
Impact & Abrasion Resistance
Concrete Patch Binder improves resistance to impact and abrasion, making it suitable for concrete surfaces exposed to regular use and wear.
Industrial Chemical Resistance
The acrylic binding agent enhances resistance to industrial chemicals in properly prepared concrete repair mixes.
Concrete Patching & Resurfacing
Concrete Patch Binder can be combined with Portland cement and sand to produce repair mixes for damaged concrete surfaces and thin overlays up to 1/2 inch thick per application.
Water-Based Acrylic Formula
The water-based liquid emulsion is designed for use as a binding agent in professional concrete maintenance and repair applications.
Recommended Uses:
- Concrete Patching & Repair Mixes
- Concrete Resurfacing Applications
- Thin Concrete Overlays
- Repairs Requiring Improved Adhesion
- Concrete Surfaces exposed to abrasion
- And More!
Application Guidelines
SealMaster
Concrete Patch Binder
Acrylic Concrete Binding Agent
Surface Preparation
Concrete surfaces must be clean and free of dirt, dust, oil, wax, coatings and other contaminants before application. Remove loose or deteriorated material to ensure proper adhesion.
Mixing Procedures
| Material | Amount |
|---|---|
| Concrete Patch Binder | 3.5 gal. |
| Sand | 100 lbs. |
| Portland Cement | 15-20 lbs. |
| Water | Up to ½ gal. as needed |
NOTE: Mix thoroughly for approximately two to four minutes. Avoid excessive mixing. Additional water may be required for workability.
Application
Apply the prepared Concrete Patch Binder mixture using a trowel or screed. Spread the material evenly over the prepared concrete surface. Apply in layers no greater than 1/2 inch thick. Allow the repair material to harden before opening the area to traffic.
Refer to the product’s technical specifications for more information regarding approved application methods, temperature requirements and drying times.
Coverage
One gallon of Concrete Patch Binder covers approximately 0.86 square yards at 1/4-inch depth.
NOTE: Coverage may vary depending on surface conditions, mix proportions and application thickness.
Important:
Temperatures must be above 50°F during application and remain so for at least 24 hours afterward. Do not apply if rain is forecast or imminent.
Available Sizes:
5-Gallon Pail – 47 lbs. | 55-Gallon Drum – 525 lbs.

