
Concrete Crack Sealant
Long-Lasting Flexibility for Concrete Crack Sealing
Concrete Crack Sealant is a 100% acrylic elastomeric sealant designed to fill cracks in concrete surfaces. Its flexible formula accommodates movement and helps prevent moisture penetration and further deterioration.
Concrete Crack Sealant is suitable for interior and exterior applications, including driveways, parking lots, sidewalks, patios and walls. Its high-solids formula minimizes shrinkage and maintains flexibility at temperatures below 0°F, ensuring dependable performance in changing weather conditions.
Features & Benefits
Flexible Elastomeric Formula
Concrete Crack Sealant features a 100% acrylic elastomeric formula that accommodates movement in concrete cracks while maintaining a flexible seal.
Low-Temperature Flexibility
Concrete Crack Sealant remains flexible at temperatures below 0°F, helping maintain an effective seal in changing weather conditions.
High-Solids Formulation
- The high-solids acrylic formula minimizes shrinkage during curing to help maintain a consistent seal within concrete cracks.
Protects Against Moisture Penetration
Concrete Crack Sealant helps prevent moisture from penetrating cracks and causing further deterioration of concrete surfaces.
Ready-to-Use Formula
Concrete Crack Sealant is supplied ready to use and requires no dilution, simplifying preparation and application.
Interior & Exterior Applications
Concrete Crack Sealant is suitable for interior and exterior applications, including concrete driveways, parking lots, sidewalks, patios and walls.
Recommended Uses:
- Concrete Driveways
- Concrete Parking Lots
- Concrete Sidewalks and Walkways
- Concrete Patios
- Concrete Walls
- And More!
Application Guidelines
SealMaster
Concrete Crack Sealant
Acrylic Concrete Crack Sealant
Surface Preparation
Concrete cracks must be clean and free of dirt, dust, vegetation and other debris before application. Remove loose material to ensure proper adhesion between the sealant and concrete surfaces.
Mixing Procedures
Concrete Crack Sealant is ready to use and requires no dilution.
Application
Cut the tip of the jug to match the width of the crack. Apply Concrete Crack Sealant directly into the prepared crack and smooth the surface using a putty knife. A foam backer rod may be used in deeper cracks to control sealant depth and reduce material consumption.
Refer to the product’s technical specifications for more information regarding approved application methods, temperature requirements and drying times.
Coverage
One gallon of Concrete Crack Sealant fills approximately 75 to 150 linear feet of cracks.
NOTE: Coverage may vary depending on crack width, depth and surface conditions.
Important:
Temperatures must be above 50°F during application and remain so for at least 24 hours afterward. Do not apply if rain is forecast or imminent.
Available Sizes:
Available Sizes | 1-Gallon Jug – 15 lbs.
Available Colors:
Off-White

