SealMaster® MasterSeal Ultra Blend Pavement Sealer – Asphalt and Blacktop Sealcoating
MasterSeal™ Ultra Blend Pavement Sealer is a clay-stabilized, asphalt emulsion pavement sealer designed to protect and beautify asphalt pavement. MasterSeal Ultra Blend is a ready to apply material that is factory blended with water, aggregate and polymer, providing a highly durable slip-resistant coating.
One gallon of MasterSeal Ultra Blend will cover approximately 70 – 82 square feet per gallon per coat (7.75 – 9.1 square yards per gallon per coat).
NOTE: Coverage rate may vary due to pavement age, porosity, and method or application.
* Colors may vary slightly from actual product.
MasterSeal Ultra Blend is ideal for protecting and beautifying all types of pavement surfaces including parking lots, shopping malls, airports, driveways, roadways and more.
Surface must be clean and free from loose material and dirt. Cracks should be filled with SealMaster Cold or Hot-Applied Crack Filling Materials. Oil stains should be cleaned and primed with SealMaster Oil Spot Primer.
Mix MasterSeal Ultra Blend thoroughly before applying. If needed, a small amount of water may be added to facilitate application.
For optimum performance and durability apply a minimum of two coats of MasterSeal Ultra Blend. A third coat may be applied to high traffic areas such as parking lot entrances, exits and drive lanes for added durability. Allow each coat to dry thoroughly before applying successive coats. Allow final coat to dry for 24 hours prior to opening to vehicle traffic.
Temperatures must be above 50°F both during application and for a period of at least 24 hours after application. Do not apply when rain is imminent or forecast.
Wash tools in water before material dries.