SealMaster® Liquid Road Ultra Blend Pavement Sealer for Roads- Asphalt and Blacktop Sealcoating

Liquid Road™ Ultra Blend Pavement Sealer is a polymer-modified, fiber reinforced asphalt emulsion coating that contains specifically graded aggregate and is applied to bituminous pavement surfaces. Liquid Road Ultra Blend is a ready to apply material that is factory blended with aggregate. Liquid Road Ultra Blend is a highly durable, slip-resistant surface treatment that greatly extends pavement service life.

Coverage

Apply Liquid Road Ultra Blend for applications on Roads and Streets at a rate of 30-40 square feet per gallon per coat (3.3 – 4.4 square yards per gallon per coat).

NOTE: Coverage rate may vary due to pavement age, porosity, and method or application.

Colors Available

black

* Colors may vary slightly from actual product.

Description

Liquid Road Ultra Blend is ideal for protecting and beautifying all types of pavement surfaces including Roads, Streets, Parking Lots, Shopping Malls, Driveways, Roadways and more. This particular specification pertains to Liquid Road Ultra Blend application on Roads and Streets.

Surface Preparation

Surface must be clean and free from loose material and dirt. Cracks should be filled with SealMaster Cold or Hot-Applied Crack Filling Materials. Oil stains should be cleaned and primed with SealMaster Oil Spot Primer.

Mixing Procedures

Mix Liquid Road Ultra Blend thoroughly before applying. If needed, a small amount of water may be added to facilitate application.

Application

To achieve optimum performance and the desired results for Liquid Road Ultra Blend, it is important to follow proper application procedures. The following two coat process is recommended for optimum performance and durability:
1. Apply, by squeegee application, the first coat of Liquid Road Ultra Blend at a rate of 30-40 square feet (3.3-4.4 square yards) per gallon. Allow first coat to dry thoroughly before applying the second coat.
2. Apply, by squeegee application, the second coat of Liquid Road Ultra Blend at a rate of 30-40 square feet (3.3-4.4 square yards) per gallon. Allow second coat to dry thoroughly before opening to traffic.

Important

Temperatures must be above 50°F both during application and for a period of at least 24 hours after application. Do not apply when rain is imminent or forecast.

Clean Up

Wash tools in water before material dries.